...
Back to glossary

Datenträgervernichtung & DIN 66399

Some data carriers can no longer be erased securely – for example because they are defective. For others, internal rules require that they be destroyed. Then physical destruction remains. The DIN 66399 standard exists so that it is clear how thoroughly destruction is carried out.

The standard divides data carriers into material classes, such as H for hard drives, E for electronic data carriers such as SSDs and USB sticks, O for optical and T for magnetic data carriers. It knows three protection classes and seven security levels. The higher the security level, the smaller the pieces must be after shredding. In this topic you will find the related terms – from the hard drive shredder and the data protection container to on-site destruction.

The glossary helps data protection officers, IT managers and procurement to understand offers and to determine the appropriate security level.

In brief

DIN 66399 governs the destruction of data carriers. The protection need of the data determines the protection class, and from it the required security level. For each material class, this sets the maximum size of the particles after shredding.

The terms at a glance

How it all connects

  1. First, clarify which Data carrier arise, and assign them to a Material class – for example material class H for hard drives, Material class E for SSDs and USB sticks or material class O for CDs and DVDs.
  2. The protection need of the data determines the Protection class.
  3. The protection class determines which Security level is required at minimum – for example the Security level H-5 for hard drives with high protection needs.
  4. Until destruction, the data carriers are collected securely, for example in a Data protection container.
  5. One Hard drive shredder or Disintegrator shreds the data carriers to the specified Particle size. A hard drive punch on the other hand only deforms them.
  6. A certificate of destruction documents the result. Whether at the plant or as On-site destruction – processes as in DIN EN 15713 ensure a secure process.

Matching service

in-house data carrier destruction: Second IT destroys hard drives, SSDs and USB sticks in-house according to DIN 66399 up to security level H-5 and E-5 – certified for H-5, video-monitored and with a certificate of destruction.

Certificates: Here you will find Second IT’s certifications, including the certification of data carrier destruction according to DIN 66399 and the ISO certificates.

Guides

Frequently asked questions

What does security level H-5 mean?

H stands for the material class hard drives, 5 for the fifth of seven security levels according to DIN 66399. The level determines how small the pieces must be after destruction so that the data cannot be reconstructed.

Which security level do I need?

That depends on the protection need of the data. From it follows the protection class, and from that the minimum security level. Your deletion concept or your data protection officer sets this in a binding way.

Is destroying more secure than erasing?

Both can be secure. A certified erasure preserves the device and its value. Destruction makes sense if a data carrier is defective, cannot be demonstrably erased or internal requirements demand it.

Is a hard drive punch as secure as a hard drive shredder?

No. A hard drive shredder shreds data carriers into small particles, and their size determines the security level according to DIN 66399. A hard drive punch only deforms the drive and therefore reaches only low security levels, because large parts of the platters remain intact.

What is the difference between on-site destruction and destruction at the service provider?

With on-site destruction, a mobile shredder in a special vehicle usually destroys the data carriers on your premises. They leave only as fragments. Alternatively, they are destroyed in the secured facility of a service provider, after a documented secure transport.

Hand over old IT securely – with proof.

Send us your device list. You will receive your offer in 48 hours on average.

Request for offer

Skip to content